Standard Type
Enforced type of ceiling mounted heat recovery ventilation device purification system
System of ventilation+air purification (application of not lower than HEPA Filter H12 grade) +system for virus prevention (application of Cluster ionizer or UV sterilization Lamp)
Heat recovery ventilation device specification of purification specialized type(purification+sterilization+ virus prevention)
Model | Main purpose Target |
Air flow intensity MAX (CMH) |
Product standard (L*H*W) |
Standard operation specification | Power consumption (W) |
Power |
---|---|---|---|---|---|---|
KAV - 10CP | Hospital, Patient’s room | 100 | 540*190*350 | 5 stages for air flow intensity control (economy, light, medium, strong, very strong), function of inside device cleaning operation <I.C.W operation> |
50 | 220V, 60Hz |
KAV - 15CP | 150 | 600*240*400 | 60 | |||
KAV - 25CP | 250 | 730*270*500 | 120 | |||
KAV - 35CP | hospital, school, kindergarten and other facilities (Buildings for special purpose) |
350 | 860*330*600 | 125 | ||
KAV - 50CP | 500 | 860*190*350 | 150 |
Standard operation function for heat recovery ventilation device specialized in purifying function(purifying+sterilization+virus prevention)
Operation mode | Running mode |
---|---|
At the Initial operation of device(turned on) I.C.W/P.D.T(Indoor Cleaning Work / Particle Down Time) |
I.C.W operation/EA FAN in very strong operation mode for 20seconds Outside air MD: OFF P.D.T preventing the re-influx of exhaust dust Maintain the device turned off for 3 seconds |
Negative pressure system operation(operation with exhaust priority)- operation for removing droplet | EA FAN –operation in medium, strong / SA FAN – operation in economy, light, medium |
Positive pressure operation(operation with supply priority) – operation for reducing CO2 | EA FAN –operation in medium, strong / SA FAN – operation in economy, light, medium |
Operation for ventilation | EA, SA FAN – operation in the same constant intensity of air flow |
5 stages of air flow intensity control | economy, light, medium, strong, very strong |
Virus prevention system installed | Optional application of UV Lamp or CLUSTER IONIZER |
Standard operation function for heat recovery ventilation device specialized in purifying function(purifying+sterilization+virus prevention)
- · Efficiency of heat exchange: air conditioning: not greater than 25%, heating: not greater than 55%
- · 5 stages of air flow intensity(upgraded control mode of air flow intensity setting – application of negative·positive pressure operation system as standard)
- · Model of design patent registration (patent number 30-1158848)
- · Function of ICW operation: inside device cleaning operation function(after 20seconds of initial exhausting operation it stops for 3 seconds and then be operated normally) to prevent the re-influx of adhesive pollutant(odor, dust)
- · Equipped with virus prevention system: optional application of UV Lamp or Cluster Ionizer is possible
- · Application of centralized control system : control over up to 24 Porte is applied
- · Filter application for removing fine dust and odor: application of higher than HEPA-H12 grade / carbon coated nonwoven PRE Filter
Enforced type of ceiling mounted heat recovery ventilation device purification system
Ceiling mounted type(side access hall type) specification/data
Model | Air flow intensity MAX (CMH) |
Product standard (L*H*W) |
Connector standard (Flange)Φ |
Consumption of power (W) |
Power |
---|---|---|---|---|---|
KAV - 10CPS | 100 | 540*300*350 | 100/65 | under 50 | 220V 60Hz |
KAV - 15CPS | 150 | 600*350*400 | 125/100 | under 100 | |
KAV - 25CPS | 250 | 730*400*500 | 150/125 | under 150 | |
KAV - 35CPS | 350 | 850*500*650 | 200/150 | under 200 | |
KAV - 50CPS | 500 | 850*500*650 | 200 | under 250 | |
KAV - 80CPS | 800 | 1400*600*1000 | 250 | under 450 | |
KAV - 100CPS | 1000 | 1400*600*1000 | 250 | under 480 | |
KAV - 150CPS | 1500 | 1540*600*1100 | 300 | under 950 | |
KAV - 200CPS | 2000 | 1540*600*1100 | 300 | under 1200 | |
KAV - 250CPS | 2500 | 1720*704*1100 | 350/300 | under 1200 |
Ceiling mounted type(side access hole type 100~1000CMH), ceiling exposure type(downward access hole type-100~350CMH)
Operation mode | Running mode |
---|---|
At the Initial operation of device(turned on) I.C.W/P.D.T(Indoor Cleaning Work / Particle Down Time) |
I.C.W operation/EA FAN in very strong operation mode for 20seconds SA FAN - OFF Outside air MD OFF / P.D.T prevention for the re-influx of exhaust dust 10 seconds of being turned off for the entire device |
Negative pressure system operation(operation with exhaust priority)- operation for removing droplet | EA FAN –operation in medium, strong / SA FAN – operation in economy, light, medium |
Positive pressure operation(operation with supply priority) – operation for reducing CO2 | EA FAN –operation in medium, strong / SA FAN – operation in economy, light, medium |
Operation for ventilation | EA, SA FAN – operation in the same constant intensity of air flow/td> |
Virus prevention system | UV Lamp(OA, RA section) multi operation |
Air flow intensity control by 5 stages | Economy, light, medium, strong, very strong |
Features of ceiling mounted standard type of energy efficiency heat recovery ventilation
- · Heat exchange efficiency standard customized (air conditioning not less than 45%, heating not less than 75%) high efficiency Element applied
- · Air flow intensity control by 5 stages :economy, medium, strong, very strong(negative and positive pressure system operation)
- · Function of ICT operation: function of inside device cleaning operation for preventing the re-influx of adhesive pollutant(odor/dust) in the device
- · Application of centralized control: capability of control of up to 24 Pot
- · Specification of Filter application: PRE Filter– carbon coated nonwoven Filter / Medium Filter 10~20T- grade of H12 Hepa Filter
Exposure installation(ceiling mounted) heat recovery ventilation device structure map
Exposure installation(wall mounted) heat recovery ventilation device structure map
Standard specification/data of export model for purification ventilation device
Model | Air flow intensity MAX (CMH) |
Product standard (L*H*W) |
Modification of operation | Consumption of power (W) |
Power |
---|---|---|---|---|---|
KAV - 350SB | 350 | 870*605*350 | Air flow intensity control by 5 stages (economy, light, medium, strong, very strong) |
125 | DC12V |
KAV - 250SB | 250 | 700*500*240 | 120 | ||
KAV - 150SB | 150 | 700*500*255 | 60 | ||
KAV - 100SB | 100 | 540*350*190 | 50 | ||
KAV - 50SB | 50 | 400*250*150 | 30 |
Export model (Ceiling type/wall mounted type) purification ventilation device Operation function
Operation mode | Running mode |
---|---|
At the Initial operation of device(turned on) I.C.W/P.D.T(Indoor Cleaning Work / Particle Down Time) |
I.C.W operation / EA FAN- operation in more strong stage of fan intensity for 20 seconds SA FAN - OFF Outside air MD: OFF/P.D.T preventing the re-influx of exhaust dust 10 seconds of being turned off for the entire device |
Negative pressure system operation(operation with exhaust priority)- operation for removing droplet | EA FAN –operation in medium, strong / SA FAN – operation in economy, light, medium |
Interoperation of air conditioning and heating (operation of heat storage) air conditioner and heater System operation at running |
EA FAN – OFF/outside air MD: OFF SA FAN–economy(ON) / heat storage MD: Open |
Positive pressure operation(operation with supply priority) – operation for reducing CO2 | EA FAN –operation in medium, strong / SA FAN – operation in economy, light, medium |
Operation of ventilation with constant quantity | EA, SA FAN– operation of the constant regular Air flow intensity |
Operation of air conditioning and heating (Peltier module applied) | Modifiable operation between cooling and heating according to user situation |
Exposure installation (ceiling/wall mounted)total heat exchanger device features
- · Dedicated product for ventilation
- · Air flow intensity control by 5 stages: economy, light, medium, strong, very strong(negative and positive pressure system operation)
- · Function of inside device cleaning operation for preventing the re-influx of adhesive pollutant(odor/dust) in the device
- · Specification of Filter application: PRE Filter– carbon coated nonwoven Filter / Medium Filter 10~20T- grade of H12 Hepa Filter
- · Application of PCT heater: temperature modification for winter OA influx(10~15 ℃ UP)