Hybrid Type of FCU & Air Conditioner
FCU Type Hybrid Heat Recovery Ventilation System
Standard specification
NO. | Sensor | Specification (running as standard, priority as standard) |
---|---|---|
1 | Ventilation device | 250CMH heat exchange efficiency: heating: not less than 75%, air conditioning: not less than 45% |
2 | Air conditioner | Water-cooling(FCI), 3.5Kw level(3,000kcal/h), 4 heat exchanger air vent applied, 1-way valve built-in |
3 | Exterior standard of device | L:800*H250*W750 |
4 | Function of purifying and sterilizing | FILER :PRE(chlorinated net)*2EA,MEDIUM HEPA: grade of H12, Cluster ionizer(elim)*2ea(OA,RA) |
5 | Duct tie hole | 4 holes of 150 pi |
6 | Diffuser for indoor | SA- LINE Diffuser1ea(recommended installation within 0.5~1M –must be insulated).*,RA-circle Diffuser*2ea |
7 | Drain | Inner mounted drain pump, Equipped with level sensor |
8 | I.C.W ( In door Cleaning Work) Operation | After on/off of device the Initial 30seconds of operation Cleaning&Element of inside & Filter sterilization, bacteria removal, heat exchanger specialized in dry process application system(all dampers opened, ionizer in operation, EA FAN in operation, SA FAN OFF) |
9 | DAMPER | Overall installation of 5 EA: MD-4EA:control over outside air, RA ventilation MD-2, RA air conditioning MD-3, ICW MD-4 BDD-1EA(EA exhaust port to shut off the outside air) |
Entire system